-
SATA HDD
-
M.2
-
Memory
-
SD Card
-
UPS Battery
-
USB
-
PCIe
SATA HDD Compatibility
1. Support SATA interface 3.5 Inch and 2.5 Inch hard drive.
2. Support a minimum of 100GB actual capacity (labeled capacity above 120GB); maximum support up to 24TB capacity.
3. Try not to use SMR stacked hard drive, in particular, using stacked hard drive to group RAID1 and RAID5 mode is not recommended. To confirm whether the current drive is a SMR hard drive or not, please consult the dealer or check on the Internet according to the model number. If using RAID5 mode, try to use enterprise-class hard drive or NAS hard drive, otherwise the potential data risk is very high.
4. It is not recommended to use some brands of customized hard drive, which may have inexplicable anomalies or be unrecognizable.
5. It is recommended to use NAS hard drive of mainstream brands, such as Seagate Ironwolf series and Western Digital Red Plus/Pro series.
6. SAS HDD is not supported.
Note: 1. Both mechanical hard drives and solid state drives have their definite service life limitations, so be sure to clarify the status of your hard drive and take appropriate measures.
2. Due to the progress of hard drive technology, the market has launched the largest 24 TB capacity hard drive. All DXP SATA ports can support 24 TB HDD. Please refer to the table for specific compatible models!
M.2 SSD Compatibility
M.2 interface supports high-speed storage, read-only cache, etc.
1. M.2 interface NVMe 2280 SSD.
2. The PCIe 4.0 SSDs in the compatibility list are supported but not recommended due to high temperatures and power consumption during high-speed read/write operations. Additionally, the temperature performance varies across different brands, models, and batches of SSDs.
3. When setting high-speed storage, the SSD must be no less than 32GB and can support up to 8TB.
4. It is recommended to purchase SSD of mainstream brand.
*Choose an endurance SSD since the life of an SSD is limited to a limited number of writes, be sure to use an SSD with higher endurance to prevent potential risks.
Memory Compatibility List
For models that support memory expansion by UGREEN, you can replace the original memory or add new memory.
1. For models supporting DDR4, select laptop memory modules above 2666MHz. For DDR5-supported models, choose laptop memory modules above 4800MHz.
2. If using two memory sticks, it is recommended to match them, such as 16+16GB or 32+32GB. The maximum supported capacity is 64GB.
3. Intel official website states that the N100-CPU supports up to 16G DDR5 4800MHz, and the G8505, i3-1215U, i5-1235U, and i7-1255U-CPU support up to 64G DDR5 4800MHz. Exceeding the official specifications cannot guarantee compatibility and stability.
* It is recommended to purchase products from major brands such as Samsung, Kioxia, Crucial (Micron), Kingston, A-DATA, etc. It is not recommended to use GLOWAY.
UPS Battery Compatibility
* Please select a UPS that supports USB connection for effective and intelligent power-off protection of NAS.